Filing Check
Advisory screening ยท not an engineering opinion
Engine verification

Checked against the book, live, every time.

Every structural check in the calculator is compared against published worked examples. The numbers below are computed by the engine running on this server, each time this page loads.

24published values checked, all within tolerance
6 of 30implemented checks verified
≤ 1%tolerance, fixed in advance
engine-91a3214943e2engine build (content hash)

Rules

  • Each value must be within 1% of the published value.
  • A capacity may never exceed the published value beyond the published rounding. Any miss has to be on the safe side.
  • An example is only used where the provision is unchanged between the example's code edition and the edition the engine implements; each source says which.
  • Checks with no published example yet are listed below as not yet verified. The calculator marks them the same way.

AISC Design Examples v15.0 (companion to the Steel Construction Manual, 15th ed.)

secondary sourceOpen source

Values as tabulated by AutoCalcs (AISC blocks automated download). Examples are keyed to AISC 360-16; F2, E3 and G2.1 are unchanged in 360-22. Shapes: AISC Shapes Database v15.0.

ExampleProvisionQuantityPublishedEngineDiff
AISC F.1-1B phiMn F2.1 yielding phiMn (kip-ft) 379.0 378.8 -0.07% pass
AISC F.1-2B Lp F2.2 limiting length Lp (in) 69.9 69.94 +0.05% pass
AISC F.1-2B Lr F2.2 limiting length Lr (in) 203.0 203.3 +0.17% pass
AISC F.1-2B Mn F2.2 inelastic LTB Mn (kip-in) 4060.0 4066 +0.16% pass
AISC F.1-2B phiMn F2.2 inelastic LTB phiMn (kip-ft) 305.0 305 -0.01% pass
AISC F.1-3B Mn F2.2 elastic LTB Mn (kip-in) 3840.0 3838 -0.06% pass
AISC F.1-3B phiMn F2.2 elastic LTB phiMn (kip-ft) 288.0 287.8 -0.06% pass
AISC E.1C phiPn E3 flexural buckling (weak axis) phiPn (kip) 892.0 893.2 +0.13% pass
AISC E.1D KL/r E3 flexural buckling (strong axis) KL/r 58.6 58.63 +0.05% pass
AISC E.1D Fe E3 flexural buckling (strong axis) Fe (ksi) 83.3 83.26 -0.05% pass
AISC E.1D Fcr E3 flexural buckling (strong axis) Fcr (ksi) 38.9 38.89 -0.03% pass
AISC E.1D phiPn E3 flexural buckling (strong axis) phiPn (kip) 927.0 927.5 +0.05% pass
AISC G.1B phiVn G2.1 web shear (rolled I-shape) phiVn (kip) 306.0 305.7 -0.09% pass

StructurePoint, Interaction Diagram - Tied Reinforced Concrete Column Design Strength (ACI 318-19), Table 1 (Wight, 8th ed., Example 11-1)

primary sourceOpen source

16x16 in, f'c 5000 psi, fy 60 ksi, 8 #9, 2.5 in to bar centroid. Compared only where phi = 0.65.

ExampleProvisionQuantityPublishedEngineDiff
SP column phiPn,max 22.4.2.1 maximum axial phiPn,max (kip) 797.7 797.7 -0.00% pass
SP column phiMn @ fs=0 22.2 / 22.4 interaction phiMn (kip-ft) 169.86 169.9 -0.00% pass
SP column phiMn @ fs=0.5fy 22.2 / 22.4 interaction phiMn (kip-ft) 220.05 220.1 +0.00% pass
SP column phiMn @ balanced 22.2 / 22.4 interaction phiMn (kip-ft) 250.77 249.8 -0.40% pass
SP column check D/C @ fs=0.5fy check puts the published point on the curve D/C 1.0 1 -0.00% pass

StructurePoint, Simply Supported Reinforced Concrete Beam Analysis and Design (ACI 318-14), version July-08-2025, sections 2 and 4.1, Table 2

primary sourceOpen source

b 12 in, d 17.56 in, f'c 4350 psi, fy 60 ksi. Flexure (22.2, Table 22.2.2.4.3, 21.2.2) and As,min (9.6.1.2) are unchanged in 318-19; the example's one-way SHEAR is not used (changed in 318-19).

ExampleProvisionQuantityPublishedEngineDiff
SP beam As,min 9.6.1.2 minimum flexural steel As,min (in2) 0.702 0.7024 +0.06% pass
SP beam a 22.2.2 Whitney block depth a (in) 3.88 3.884 +0.10% pass
SP beam beta1 Table 22.2.2.4.3 beta1 0.83 0.8325 +0.30% pass
SP beam eps_t 21.2.2 tension-controlled strain eps_t 0.0083 0.008292 -0.09% pass
SP beam phiMn = Mu 22.2 flexural strength (phi 0.90) phiMn (kip-ft) 201.88 201.8 -0.02% pass
SP beam wu = 1.2D + 1.6L basic combination 1.2D + 1.6L wu (kip/ft) 2.58 2.584 +0.16% pass

Implemented but not yet verified against a published example

These exist in the engine but are not offered in the calculator until a published example covers them.

aci_318_19.check_beam_shearACI318 318-19
aci_318_19.check_column_shearACI318 318-14
aci_318_19.check_development_lengthACI318 318-19
aci_318_19.check_torsionACI318 318-19
aci_318_19.check_two_way_shearACI318 318-19
aci_318_19.check_wall_in_plane_shearACI318 318-19
aci_318_19.check_wall_min_reinforcementACI318 318-19
aisc_360_22.check_block_shearAISC360 360-22
aisc_360_22.check_bolt_group_shearAISC360 360-22
aisc_360_22.check_combined_memberAISC360 360-22
aisc_360_22.check_fillet_weldAISC360 360-22
aisi_s100_16.check_combined_cfsAISI_S100 S100-16
aisi_s100_16.check_compression_cfsAISI_S100 S100-16
aisi_s100_16.check_flexure_cfsAISI_S100 S100-16
asce_7_22.assess_eifs_facade_wallASCE7 7-16
asce_7_22.cc_wall_pressureASCE7 7-16
asce_7_22.check_p_delta_storyASCE7 7-22
asce_7_22.eifs_stud_checkASCE7 7-16
asce_7_22.reduce_live_loadASCE7 7-22
nds_2018.check_bending_sawnNDS 2018
nds_2018.check_combined_sawnNDS 2018
nds_2018.check_compression_sawnNDS 2018
tms_402_22.check_cmu_axial_flexureTMS402 402-22
tms_402_22.check_cmu_in_plane_shearTMS402 402-22

Verification shows the engine reproduces published examples; it is not an engineering opinion or a design. The engineer of record owns the design.